HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 508

46 HAM-1005 • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis Config • Reboot:API • Reboot:HAM • EMFault:EM Recommended Execute the errShow command on both the CPs to view the error log for additional messages that Action may indicate reason for the switch restart. Severity INFO HAM-1005 Message , [HAM-1005], , SLOT cp-slot-number | CHASSIS, INFO, , HeartBeat Miss reached threshold. Probable Cause Indicates that the active CP Ethernet Media Access Controller (EMAC) or the standby CP is down. The active CP will run a diagnostic test on the EMAC and will wait for the standby CP to reset if it is down. Recommended No action is required. Action Severity INFO HAM-1006 Message Probable Cause , [HAM-1006], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, , EMAC controller for Active CP is BAD. Indicates that the local EMAC on the active CP has been marked BAD as determined by the diagnostic test run by the HAM module. 422 Fabric OS Message Reference 53-1002448-01