HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 379

FICN-1046 38 FICN-1046 Message , [FICN-1046], ,, WARNING, , HostTapeIng:LRJ received on Path= lastCmds=0x lastStatus=0x treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel believes that it no longer has a path established to the CU. Recommended This is normally an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1047 Message , [FICN-1047], ,, ERROR, , fcFicSetEmulation:Path= FDCB Not Idle state=0x prevState=0x set to state=0x. Probable Cause Indicates there is an internal emulation error. This message should not be encountered. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1048 Message , [FICN-1048], ,, WARNING, , DevDiskEgr:FICON Cancel received Path= state=0x sflags=0x. Probable Cause Indicates the operator has cancelled a read or write job. Recommended This is an unexpected event; contact your vendor's customer support for assistance. Action Severity WARNING Fabric OS Message Reference 293 53-1002448-01