HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 406

38 FICN-2085 Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-2085 Message , [FICN-2085], ,, INFO, , FICON or FCP Emulation Enabled FCIP Tunnel is Up on VEPort=. Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel has been established successfully to the peer switch. Recommended No action is required. Action Severity INFO FICN-2086 Message , [FICN-2086], ,, ERROR, , FICON or FCP Emulation Enabled FCIP Tunnel is Up on VEPort=. Probable Cause Indicates a FICON or FCP Emulation Enabled FCIP tunnel to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-2087 Message , [FICN-2087], ,, ERROR, , FICON connected 3900 printer discovered Path=0x-invalid compression mode. Probable Cause Indicates that FICON Printer emulation is enabled, but cannot be performed for this device due to the fact that the compression mode on the tunnel is not NONE or Aggressive. Recommended If you desire FICON Printer Emulation for this device, modify the tunnel compression mode to None Action (mode 0) or Aggressive (mode 3). Severity ERROR 320 Fabric OS Message Reference 53-1002448-01