HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 491

FW-1445 45 FW-1445 Message , [FW-1445], ,, INFO, , Four power supplies are now required for 2X redundancy, Switch Status Policy values changed. Probable Cause Indicates that the switch now requires four power supplies and previous Switch Status Policy parameters will be overwritten to reflect this. The presence of an AP blade means that more than one power supply may be required to provide adequate power. So (even if the AP blade is powered down or removed) the Switch Status policy values will now reflect the need for four power supplies to maintain full (2X) redundancy. Recommended No action required, unless there are fewer than four power supplies active in the chassis. If there Action are fewer than four, insert additional power supplies so that there are four active. Severity INFO FW-1446 Message , [FW-1446], ,, WARNING, , Four power supplies now required for 2X redundancy, not enforced by Fabric Watch due to Switch Status Policy overridden by User. Probable Cause Indicates that the switch now requires four power supplies for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. With no AP blades, the default values are 3 (out of service) indicating switch status is DOWN or 0 indicating no checking for switch status MARGINAL. When an AP blade is or has been present, the default values are 2 (out of service) indicating switch status is DOWN or 1 (out of service) indicating switch status is MARGINAL. Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, four active power supplies should be supplied and the default values associated with the presence of an AP blade should be entered using the switchStatusPolicyset command. Severity WARNING FW-1447 Message , [FW-1447], ,, WARNING, , Switch status change contributing factor Core Blade: Core blade failures (). Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of core blade failures is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Replace the faulty core blade. Action Severity WARNING Fabric OS Message Reference 405 53-1002448-01