HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 407

Chapter FICU System Messages 39 FICU-1001 Message Probable Cause , [FICU-1001], ,, ERROR, , : config failed rc = . Indicates that one of the configuration management functions have failed. The key variable is a part of the Fabric OS configuration database and is for support use only. The error variable is an internal error number. Recommended Action Execute the haFailover command on the switch if it has redundant control processors (CPs) or restart the switch. Execute the switchStatusShow command to check if your flash is full. If the flash is full, execute the supportSave command to clear the core files. Severity ERROR FICU-1002 Message , [FICU-1002], ,, ERROR, , : Failed to get RNID from Management Server: Domain=, rc=. Probable Cause Indicates that the Fibre Connectivity Control Unit Port (FICON-CUP) daemon failed to get the switch request node ID (RNID) from the management server because of a Fabric OS problem. The domain variable displays the domain ID of the target switch for this RNID. The error variable is an internal error number. Recommended For bladed switch, execute the haFailover command. If the problem persists, or for a nonbladed Action switch, download a new firmware using the firmwareDownload command. Severity ERROR FICU-1003 Message , [FICU-1003], ,, WARNING, , : FICON-CUP License Not Installed: (). Probable Cause Indicates that the FICON-CUP license is not installed on the switch. Recommended Action Execute the licenseShow command to check the installed licenses on the switch. The switch cannot be managed using FICON-CUP commands until the FICON-CUP license is installed. Contact your switch supplier for a FICON-CUP license. Execute the licenseAdd command to add the license to your switch. Severity WARNING Fabric OS Message Reference 321 53-1002448-01