HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 189

Chapter C3 System Messages 12 C3-1001 Message , [C3-1001], ,, ERROR, , Port failed due to SFP validation failure. Check if the SFP is valid for the configuration. Probable Cause Indicates a deteriorated small form-factor pluggable (SFP), an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that compatible SFPs are used on the peer ports, the SFPs have not deteriorated, and the Action Fibre Channel cable is not faulty. Replace SFPs or cable if necessary. Severity ERROR C3-1002 Message , [C3-1002], , FFDC, ERROR, , Port chip failed due to an internal error. Probable Cause Indicates an internal error. All the ports on the blade or switch will be disrupted. Recommended To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To Action recover a non-bladed system, execute the fastboot command on the switch. Severity ERROR C3-1004 Message , [C3-1004], ,, ERROR, , S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Probable Cause Indicates an internal error in the Application-Specific Integrated Circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error is observed, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR Fabric OS Message Reference 103 53-1002448-01