HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 176

9 BLS-1003 BLS-1003 Message , [BLS-1003], , INFO, , An IPsec/IKE policy was deleted. Probable Cause Indicates that an IPsec or IKE policy was deleted and the configuration file was updated. Recommended No action is required. Action Severity INFO BLS-1004 Message , [BLS-1004], ,, INFO, , Tape Read Pipelining is being disabled slot () port () tunnel (). Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support the Tape Read Pipelining feature. Recommended No action is required. Action Severity INFO BLS-1005 Message , [BLS-1005], ,, ERROR, , S,P() [OID 0x]: : port faulted due to SFP validation failure. Please check if the SFP is valid for the configuration. Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Ensure that you are using compatible SFPs on the peer ports. Verify whether the SFPs have Action deteriorated and the Fibre Channel cable is faulty. Replace the SFPs or cable, if necessary. Severity ERROR 90 Fabric OS Message Reference 53-1002448-01