HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 356

37 FCR-1068 The limit includes both active and configured information that is part of the zoning database in the edge fabric. Non-LSAN zones are not counted in the limit. Recommended Limit the logical storage area network (LSAN) zoning related zone configuration in the edge fabric Action connected to this port. Severity WARNING FCR-1068 Message , [FCR-1068], ,, INFO, , The FC Routing service is disabled. Probable Cause Indicates that the FC Routing service is disabled. This is caused by fosConfig --disable fcr, configDefault, or a configDownload with the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity INFO FCR-1069 Message , [FCR-1069], ,, INFO, , The FC Routing service is enabled. Probable Cause Indicates that the FC Routing service is enabled. This is caused by either fosConfig --enable fcr, or a configDownload with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity INFO FCR-1070 Message , [FCR-1070], ,, INFO, , The FC Routing configuration is set to default. Probable Cause Indicates that the FC Routing configuration is set to default by user. This removes all prior FC Routing configurations. Recommended No action is required. Action Severity INFO 270 Fabric OS Message Reference 53-1002448-01