HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 765

100 SSMD-1008 Recommended Try again after sometime. If the problem persists, execute the supportSave command and then Action restart or power cycle the switch. Severity ERROR SSMD-1008 Message , [SSMD-1008], ,, ERROR, , Apptype TCAM Table full for Slot: chip:. Probable Cause Indicates that the application type TCAM table is full on the specified chip. Recommended Remove the unused protocol-based VLAN classifiers and Layer 2 Extended access control lists Action (ACLs). Severity ERROR SSMD-1200 Message , [SSMD-1200], ,, WARNING, , QoS failed programming ASIC / Multicast Rate Limit. Probable Cause Indicates that DCE SSM encountered an unexpected error in programming the dataplane application-specific integrated circuit (ASIC) for the enforcing Multicast Rate Limit feature. Recommended Action Delete and reapply Quality of Service (QoS) Multicast Rate Limit policy using the qos rcv-queue multicast rate-limit command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1201 Message , [SSMD-1201], ,, WARNING, , QoS failed programming ASIC / Multicast Tail Drop. Probable Cause Indicates that DCE SSM encountered an unexpected error in programming the dataplane ASIC for the enforcing Multicast Tail Drop feature. Recommended Action Delete and reapply QoS Multicast Tail Drop policy using the qos rcv-queue multicast threshold command. If the problem persists, restart or power cycle the switch. Severity WARNING Fabric OS Message Reference 679 53-1002448-01