HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 845

115 ZONE-1027 ZONE-1027 Message , [ZONE-1027], ,, INFO, , Zoning transaction aborted . . Probable Cause Indicates the zoning transaction was aborted because of one of the following conditions: • Zone Merge Received: The fabric is in the process of merging two zone databases. • Zone Config update Received: The fabric is in the process of updating the zone database. • Bad Zone Config: The new configuration is not viable. • Zoning Operation failed: A zoning operation failed. • Shell exited: The command shell has exited. • Unknown: An error was received for an unknown reason. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Most of these error conditions are transitory. Recommended Try again after sometime. Verify that only one administrator is modifying with the zone database at Action a time. Severity INFO ZONE-1028 Message , [ZONE-1028], ,, WARNING, , Commit zone DB larger than supported - greater than . Probable Cause Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone database size depends on the lowest level switch in the fabric. Older switches have less memory and force a smaller zone database for the entire fabric. Recommended Execute the cfgSize command to view the zone database size information. Edit the zone database Action to keep it within the allowable limit for the specific switches in your fabric. Severity WARNING ZONE-1029 Message Probable Cause , [ZONE-1029], ,, WARNING, , Restoring zone cfg from flash failed - bad config saved to []. Indicates that the zone configuration restored from the flash was faulty. This error will save the faulty zone configuration in the zoned core file directory. Fabric OS Message Reference 759 53-1002448-01