HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 760

99 SS-1003 SS-1003 Message , [SS-1003], ,, WARNING, , supportSave's operation to USB storage device aborted. Probable Cause Indicates that a USB operation error has occurred during execution of the supportSave command. Complete error information cannot always be displayed in this message because of possible errors in subcommands being executed by the supportSave command. Recommended Execute the usbstorage command to check the USB storage device settings. After the USB problem Action is corrected, execute the supportSave command again. Severity WARNING SS-1004 Message , [SS-1004], ,, WARNING, , One or more modules timed out during supportsave. Retry supportsave with -t option to collect all logs. Probable Cause Indicates timeout in modules during the execution of the supportSave command. Recommended Execute the supportSave -t [2-5] command to collect all logs. Action Severity WARNING SS-1005 Message , [SS-1005], ,, WARNING, , supportsave failed for the slot . Reason: No IP connection. Probable Cause Indicates that there is no IP connection between the Active control processor (CP) and the blade in the specified slot. Recommended Check for the IP connection between the Active CP and the blade in the specified slot. After the IP Action connection is established, execute the supportSave command again. Severity WARNING SS-1006 Message Probable Cause , [SS-1006], ,, WARNING, ,supportsave not collected for slot . Reason: blade was not available to accept a supportsave request. Indicates that the supportsave request was not sent to the blade in the specified slot. 674 Fabric OS Message Reference 53-1002448-01