HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 693

SEC-1119 94 SEC-1119 Message , [SEC-1119], ,, INFO, , Secure mode has been enabled. Probable Cause Indicates the secure Fabric OS was enabled by the secModeEnable command. Recommended Action Verify the security event was planned. If the security event was planned, there is no action required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1121 Message , [SEC-1121], ,, ERROR, , Time is out of range when . Probable Cause Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS), the data packet is corrupted, or a replay attack is launched on the switch. Recommended Action Verify the security event was planned. If the security event was planned, verify that all switches in the fabric are in time synchronization with the primary FCS and that no external entity is trying to access the fabric. When verification is complete, retry the operation. Severity ERROR SEC-1122 Message , [SEC-1122], ,, INFO, , Error code: , . Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric configuration server (FCS). Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry the operation. Severity INFO SEC-1123 Message Probable Cause , [SEC-1123], ,, INFO, , Security database downloaded by Primary FCS. Indicates the security database was successfully downloaded from the primary fabric configuration server (FCS). Fabric OS Message Reference 607 53-1002448-01