HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 170

7 BL-1046 BL-1046 Message , [BL-1046], ,, ERROR, , error on SFP in Slot /Port (). Try reseating or replacing it. Probable Cause Indicates the checksum in an area on the SFP does not match with the computed one or there is problem accessing the data. Recommended Try reseating the SFP, if problem persists replace it. Action Severity ERROR BL-1047 Message , [BL-1047], ,, INFO, , Buffer optimized mode is turned for slot . Probable Cause Indicates the buffer optimized mode is changed for the slot. Recommended No action is required. Action Severity INFO BL-1048 Message , [BL-1048], ,, WARNING, , FCoE Blade in slot failed because the Interop mode is enabled on the switch. Probable Cause Indicates that the interop mode is turned on in the default switch while powering on the FCoE blade. Recommended Try turning off the interop mode using the interopmode command. Then execute the slotPowerOff Action and slotPowerOn commands on the FCoE blade. Severity WARNING BL-1049 Message Probable Cause , [BL-1049], ,, INFO, , Serdestunemode is turned . Indicates that the serdestunemode is changed for the slot. 84 Fabric OS Message Reference 53-1002448-01