HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 428

45 FW-1004 Recommended This message generally appears when a fan fails. If so, a fan failure message accompanies this Action message. Replace the fan field-replaceable unit (FRU). Severity WARNING FW-1004 Message , [FW-1004], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. If you receive a temperature-related message, check for an accompanying fan-related message and check fan performance. If all fans are functioning normally, check the climate control in your lab. Severity INFO FW-1009 Message , [FW-1009], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the state of the power supply has changed from faulty to functional, or from functional to faulty. Recommended Action If the power supply is functioning correctly, no action is required. If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power. Recommended Verify that you have installed the power supply correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the faulty power supply. Severity WARNING 342 Fabric OS Message Reference 53-1002448-01