HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 835

ZEUS System Messages Chapter 114 ZEUS-1001 Message , [ZEUS-1001], ,, ERROR, , Port port fault. Please change the SFP or check cable. Probable Cause Indicates a deteriorated small form-factor pluggable (SFP), an incompatible SFP pair, or a faulty cable between peer ports. Recommended Verify if you are using a compatible SFPs on the peer ports. Determine whether the SFPs have Action deteriorated and the Fibre Channel cable is faulty. Replace the SFPs or cable if necessary. Severity ERROR ZEUS-1002 Message , [ZEUS-1002], , FFDC, ERROR, , Port chip faulted due to internal error. Probable Cause Indicates an internal error. All the ports on the blade or switch will be disruptive. Recommended Action For a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade to recover the system. For a non-bladed system, perform fastBoot command on the switch to recover the system. Severity ERROR ZEUS-1003 Message , [ZEUS-1003], , , CRITICAL, , S,C: HW ASIC Chip error type = 0x. Probable Cause Indicates an internal error in the application specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Restart the system at the next maintenance window. If the problem persists, replace the blade. Action Severity CRITICAL Fabric OS Message Reference 749 53-1002448-01