HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 717

SEC-1318 94 Recommended If a policy conflict exists, resolve it, then wait for the fabric to become stable. Retry the distribution. Action Severity INFO SEC-1318 Message , [SEC-1318], ,, INFO, , Transaction rejected due to inconsistent fabric. Probable Cause Indicates that some domains detected an inconsistent fabric. Recommended Resolve the policy conflict, if there is one, then wait for the fabric to stabilize. Retry the distribution. Action Severity INFO SEC-1319 Message , [SEC-1319], ,, INFO, , updated dbs(s). Probable Cause Indicates the specified event has occurred. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-1320 Message , [SEC-1320], ,, WARNING, , Non-acl domain tries to join a fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a strict fabric-wide policy. Recommended No action is required. The domain is denied by disallowing all its E_ports from connecting to the Action fabric. Severity WARNING SEC-1321 Message Probable Cause , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Indicates the security enable failed on the fabric because the switch has a conflicting configuration such as fabric wide consistency configuration or AD configuration. Fabric OS Message Reference 631 53-1002448-01