HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 623

PDM-1017 79 Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1017 Message , [PDM-1017], , FFDC, CRITICAL, , System (): . Probable Cause Indicates the specified system call failed. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM-1019], ,, WARNING, , File path or trigger too long. Probable Cause Indicates one line of the pdm.conf file is too long. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1020 Message , [PDM-1020], ,, WARNING, , Long path name (/), Skip. Probable Cause Indicates the specified file path name is too long. The maximum character limit is 49 characters. Recommended Use path names not exceeding 49 characters in length for the files to be replicated. Action Severity WARNING Fabric OS Message Reference 537 53-1002448-01