HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 126

2 AG-1018 Recommended Execute the switchShow command to display the status of all ports in the system. Execute the Action portCfgShow command to display the list of ports currently configured as N_Ports. Severity WARNING AG-1018 Message , [AG-1018], ,, ERROR, , Host port should not be connected to port , which is configured as N_Port. Probable Cause Indicates that an Initiator or Target is erroneously connected to a port configured for N_Port operation. Recommended Action Execute the switchShow command to display the status of all ports in the system. Execute the portCfgShow command to display the list of ports currently configured as N_Ports. Make sure that the host is connected to an F_port. Severity ERROR AG-1019 Message , [AG-1019], ,, WARNING, , Unable to failover N_Port . No other N_Port in port group: is online. Probable Cause Indicates that failover across port groups is not supported. Recommended Check whether an alternate N_Port is configured in this port group. Action Severity WARNING AG-1020 Message , [AG-1020], ,, INFO, , F_Ports to N_Ports route/mapping has been changed. Probable Cause Indicates that F_Port -to-N_Port mapping has been changed because the switch has come online or some new N_Port or F_Port has come online. Recommended Execute the ag --mapshow command to display the updated F_Port-to-N_Port mapping. Action Severity INFO 40 Fabric OS Message Reference 53-1002448-01