HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 664

93 SCN-1002 SCN-1002 Message , [SCN-1002], , FFDC, ERROR, , SCN queue overflow for process . Probable Cause Indicates that an attempt to write a State Change Notification (SCN) message to a specific queue has failed because the SCN queue for the specified daemon name is full. This might be caused by the daemon hanging or the system being busy. The following are some of the valid values for the daemon name. Refer to the Fabric OS Message Reference for complete list: • fabricd • asd • evmd • fcpd • webd • msd • nsd • psd • snmpd • zoned • fspfd • tsd Recommended Action If this message is caused by the system being busy, the condition is temporary. If this message is caused by a hung daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. In this case, run the supportSave command to send the core files using FTP to a secure server location. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR 578 Fabric OS Message Reference 53-1002448-01