HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 434

45 FW-1047 FW-1047 Message , [FW-1047], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. Recommended The supplied current of the SFP transceiver is outside of the normal range, indicating possible Action hardware failure. If the current rises above the high boundary, you must replace the SFP. Severity WARNING FW-1048 Message , [FW-1048], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. Recommended Frequent voltage fluctuations indicate that the SFP is deteriorating. Replace the SFP. Action Severity INFO FW-1050 Message Probable Cause , [FW-1050], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low boundary. 348 Fabric OS Message Reference 53-1002448-01