HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 361

FCR-1085 37 Recommended No action is required. Action Severity WARNING FCR-1085 Message , [FCR-1085], ,, ERROR, , HA sync lost as remote CP does not support FCR based matrix. Probable Cause Indicates that the remote control processor (CP) has earlier firmware, which does not support the FCR- based matrix while the local CP has the feature enabled. This is causing the loss of the high-availability (HA) synchronization. Recommended Disable FCR-based matrix or upgrade the remote CP. Action Severity ERROR FCR-1086 Message , [FCR-1086], ,, ERROR, , HA sync lost as remote CP does not support Condor2 based EX_ports. Probable Cause Indicates that the remote control processor (CP) has older firmware, which does not support Condor-based EX_ port. This is causing the loss of the high-availability (HA) synchronization. Recommended Disable Condor2-based EX_ports or upgrade the remote CP. Action Severity ERROR FCR-1087 Message , [FCR-1087], ,, ERROR, , ExPort connects to fabric with capability to use XISL domain . Probable Cause Indicates that the EX_Port connects to logical fabric containing a domain has the capability to use XISL. Recommended Disable the 'Allow to use XISL' mode of the domain by using the configure command. Action Severity ERROR Fabric OS Message Reference 275 53-1002448-01