HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 385

FICN-1065 38 FICN-1065 Message , [FICN-1065], ,, INFO, , Egress Abort:Oxid=0x:Unknown Path on GEPort= VEPort= from SID=0x to DID=0x. Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity INFO FICN-1066 Message , [FICN-1066], ,, WARNING, , MemAllocFailed for GEPort= VEport= could not create required structure. Probable Cause Indicates an internal resource limit has been encountered such that additional control block memory could not be allocated. Recommended This is an unexpected event, either the maximum number of emulation devices are already in use Action or there is an internal memory leak, contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CH=0x . Probable Cause Indicates an abort operation has been received from a local FC interface for an emulation CH exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity ERROR FICN-1068 Message Probable Cause , [FICN-1068], ,, ERROR, , Ingress Abort:Oxid=0x:Abort for CU=0x . Indicates an abort operation has been received from a local FC interface for an emulaton CU exchange. Fabric OS Message Reference 299 53-1002448-01