HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 99

Commands for displaying and configuring the system message logs 1 bdClearTrap: YES FE-MIB (yes, y, no, n): [yes] SW-MIB (yes, y, no, n): [yes] FA-MIB (yes, y, no, n): [yes] FICON-MIB (yes, y, no, n): [yes] HA-MIB (yes, y, no, n): [yes] FCIP-MIB (yes, y, no, n): [yes] ISCSI-MIB (yes, y, no, n): [yes] IF-MIB (yes, y, no, n): [yes] BD-MIB (yes, y, no, n): [yes] SW-TRAP (yes, y, no, n): [yes] swFault (yes, y, no, n): [yes] swSensorScn (yes, y, no, n): [yes] swFCPortScn (yes, y, no, n): [yes] swEventTrap (yes, y, no, n): [yes] DesiredSeverity: (0..4) [4] 3 swFabricWatchTrap (yes, y, no, n): [yes] DesiredSeverity: (0..4) [0] 2 swTrackChangesTrap (yes, y, no, n): [yes] swIPv6ChangeTrap (yes, y, no, n): [yes] swPmgrEventTrap (yes, y, no, n): [yes] [...] 3. Execute the snmpConfig --show mibCapability command to verify the severity level of swEventTrap. switch:admin> snmpconfig --show mibcapability FE-MIB: YES SW-MIB: YES FA-MIB: YES FICON-MIB: YES HA-MIB: YES FCIP-MIB: YES ISCSI-MIB: YES IF-MIB: YES BD-MIB: YES SW-TRAP: YES swFault: YES swSensorScn: YES swFCPortScn: YES swEventTrap: YES DesiredSeverity:Informational swFabricWatchTrap: YES DesiredSeverity:Critical swTrackChangesTrap: YES swIPv6ChangeTrap: YES swPmgrEventTrap: YES swFabricReconfigTrap: YES [...] Commands for displaying and configuring the system message logs Table 3 describes commands that you can use to view or configure the system message logs. Most commands require the admin access level. For detailed information on required access levels and commands, refer to the Fabric OS Command Reference. Fabric OS Message Reference 13 53-1002448-01