HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 828

113 XTUN-1003 XTUN-1003 Message , [XTUN-1003], ,, ERROR, , FCIP Tunnel Message Transmission failed:I/T/L/E:///. Probable Cause Indicates a message transmission failure. Recommended If there was an unexpected job failure associated with this event, contact your customer support for Action assistance. Severity ERROR XTUN-1004 Message , [XTUN-1004], ,, ERROR, , FCIP Tunnel Exchange aborted:I/T/L://. Probable Cause Indicates that the FCP exchange has been aborted by the Initiator. Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer Action support for assistance. Severity ERROR XTUN-1005 Message , [XTUN-1005], ,, WARNING, , FCP emulation for Tunnel/Initiator/Target/LUN:/// may not be optimal. Probable Cause Indicates that the FCP emulation is in Fastwrite mode and could also be in Tape Pipelining mode. Recommended For disk devices, no action is required. For tape devices, device rediscovery is required. Action Severity WARNING XTUN-1996 Message Probable Cause , [XTUN-1996], ,, INFO, , FTRACE buffer on slot DP has been cleared. Indicates that a CLI command or a support save operation freed the trace buffer back into the FTRACE free pool. 742 Fabric OS Message Reference 53-1002448-01