HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 374

38 FICN-1030 FICN-1030 Message , [FICN-1030], ,, ERROR, , HostDiskIng:FICON Purge received:Path= . Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch Action service provider. Severity ERROR FICN-1031 Message , [FICN-1031], ,, WARNING, , HostDiskIng:FICON System Reset received on Path=. Probable Cause Indicates the FICON channel sent a System Reset to the disk control unit. Recommended No action is required. The MVS system was set to IPL or performing error recovery. Action Severity WARNING FICN-1032 Message , [FICN-1032], ,, INFO, , HostDiskIng:XRC Read Channel Extender Capabilities detected on Path: . Probable Cause Indicates that the XRC SDM was restarted to discover the capabilities of the channel extension equipment. Recommended No action is required. This is part of the XRC initialization. Action Severity INFO FICN-1033 Message Probable Cause , [FICN-1033], ,, INFO, , HostEgr:Logical Path Established on Path= . Indicates that the peer side FICON Control Unit has accepted a logical path establishment command sequence with the FICON channel. 288 Fabric OS Message Reference 53-1002448-01