HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 405

FICN-2065 38 FICN-2065 Message , [FICN-2065], ,, INFO, , Egress Abort:Oxid=0x:Unknown Path on VEPort= from SID=0x to DID=0x. Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity INFO FICN-2066 Message , [FICN-2066], ,, WARNING, , MemAllocFailed for VEport= could not create required structure. Probable Cause Indicates an internal resource limit has been encountered such that additional control block memory could not be allocated. Recommended This is an unexpected event, either the maximum number of emulation devices are already in use Action or there is an internal memory leak, contact your vendor's customer support for assistance. Severity WARNING FICN-2082 Message , [FICN-2082], ,, WARNING, , EmulEls:CSWR_RSCN received on VEPort= Domain=0x Port=0x. Probable Cause Indicates an attached port which had a FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-2083 Message Probable Cause , [FICN-2083], ,, WARNING, , EmulEls:SW_RSCN received on VEPort= Domain=0x Port=0x. Indicates an attached port with the established FICON emulated path has logged out from the switch. Fabric OS Message Reference 319 53-1002448-01