Pioneer AVIC-5100NEX Owner's Manual - Page 193
GPS Antenna, Positioning Status, Installation, Inst. Angle, NOKVibration, Speed Pulse, Illumination
View all Pioneer AVIC-5100NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
System settings Chapter 32 System settings 6 7 1 GPS Antenna Indicates the connection status of the GPS antenna, the reception sensitivity, and from how many satellites the signal is received. Color Orange Yellow Signal communication Yes Yes Used in positioning Yes No p When the GPS antenna is connected to this product, "OK" is displayed. When the GPS antenna is not connected to this product, "NOK" is displayed. p If reception is poor, please change the installation position of the GPS antenna. 2 Positioning Status Displays the positioning status (3D positioning, 2D positioning, or no positioning), the number of satellites used for positioning (orange), and the number of satellites whose signal has been received (yellow). If signals from more than three satellites are received, the current location can be measured. = For details, refer to Positioning technology on page 236. 3 Installation Indicates whether the installation position of this product is correct or not. If installed correctly, "OK" appears. When this product is installed at an extreme angle exceeding the limitation of the installing angle, "NOK (Inst. Angle)" will be displayed. When the angle of this product has been changed, "NOK(Vibration)" will be displayed. 4 Speed Pulse The Speed Pulse value detected by this product is shown. "0" is shown while the vehicle is stationary. 5 Illumination When the headlights or small lamps of the vehicle are on, "ON" is displayed. When the small lamps of the vehicle are off, "OFF" is displayed. (If the orange/white lead is not connected, "OFF" appears.) 6 Back Signal When the shift lever is shifted to "R", the signal switches to "High" or "Low". (One of these is displayed depending on the vehicle.) 7 iDataLink When the optional iDatalink adapter is connected and the protocol version matches, "OK" is displayed. If the version does not match, "Unsupported Version" is displayed. If the optional iDatalink adapter is not connected, "NOK" is displayed. En 193