D-Link DES-3528 Product Manual - Page 103
FDB, Unicast Static FDB Settings
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Passive - LACP ports that are designated as passive cannot initially send LACP control frames. In order to allow the linked port group to negotiate adjustments and make changes dynamically, one end of the connection must have "active" LACP ports (see above). Click the Apply button to accept the changes made. FDB Static FDB Settings Unicast Static FDB Settings Users can set up static unicast forwarding on the Switch. To view the following window, click L2 Features > FDB > Static FDB Settings > Unicast Static FDB Settings, as shown below: Figure 4-36 Unicast Static FDB Settings window The fields that can be configured are described below: Parameter Description VLAN Name Click the radio button and enter the VLAN name of the VLAN on which the associated unicast MAC address resides. VLAN List Click the radio button and enter a list of VLAN on which the associated unicast MAC address resides. MAC Address The MAC address to which packets will be statically forwarded or dropped. This must be a unicast MAC address. Port/Drop Allows the selection of the port number on which the MAC address entered above resides This option could also drop the MAC address from the unicast static FDB. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Multicast Static FDB Settings Users can set up static multicast forwarding on the Switch. To view the following window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings, as shown below: 94