D-Link DES-3528 Product Manual - Page 118

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 4-54 MLD Snooping Settings window The fields that can be configured are described below: Parameter Description MLD Snooping State Click the radio buttons to enable or disable the MLD snooping state. Max Learning Entry Value Enter the maximum learning entry value. (1-1024) Click the Apply button to accept the changes made for each individual section. Click the Edit button to configure the MLD Snooping Parameters Settings for a specific entry. Click the Modify Router Port link to configure the MLD Snooping Router Port Settings for a specific entry. After clicking the Edit button, the following page will appear: Figure 4-55 MLD Snooping Parameters Settings window The fields that can be configured or viewed are described below: Parameter Description VID VLAN Name Rate Limit Querier IP Querier Expiry Time Query Interval (1-65535) Specify the name of the VLAN ID. Specify the name of the VLAN for which IGMP snooping querier is to be configured. This displays the rate of IGMP control packets that the Switch can process on a specific VLAN. The rate is specified in packet per second. The packets that exceed the limited rate will be dropped. Displays the querier IP address Displays the querier expiry time. Specify the amount of time in seconds between general query transmissions. The default setting is 125 seconds. 109