D-Link DES-3528 Product Manual - Page 62

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide SNMP Host Table Settings Users can set up SNMP trap recipients for IPv4. To view the following window, click Management > SNMP Settings > SNMP Host Table Settings, as shown below: Figure 3-41 SNMP Host Table Settings window The fields that can be configured are described below: Parameter Description Host IP Address Enter the IP address of the remote management station that will serve as the SNMP host for the Switch. User-based Security Model SNMPv1 - Specify that SNMP version 1 will be used. SNMPv2 - Specify that SNMP version 2 will be used. SNMPv3 - Specify that SNMP version 3 will be used. Security Level NoAuthNoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. AuthNoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. AuthPriv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String / SNMPv3 User Name Enter the community string or SNMP V3 user name as appropriate. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. SNMPv6 Host Table Settings Users can set up SNMP trap recipients for IPv6. To view the following window, click Management > SNMP Settings > SNMPv6 Host Table Settings, as shown below: 53