D-Link DES-3528 Product Manual - Page 293
DHCP Server Manual Binding
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 293 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide menus to precisely set the time by hours and minutes. Users may also use the Infinite check box to set the allotted IP address to never be timed out of its lease. The default setting is 1 day. Click the Apply button to accept the changes made. Click the DHCP Server > DHCP Server Manual Binding, as shown below: Figure 9-13 DHCP Server Manual Binding window The fields that can be configured are described below: Parameter Description Pool Name Enter the name of the DHCP pool within which will be created a manual DHCP binding entry. IP Address Enter the IP address to be statically bound to a device within the local network that will be specified by entering the Hardware Address in the following field. Hardware Address Enter the MAC address of the device to be statically bound to the IP address entered in the previous field. Type This field is used to specify the type of connection for which this manually bound entry will be set. Ethernet will denote that the manually bound device is connected directly to the Switch, while the IEEE802 denotes that the manually bound device is outside the local network of the Switch. Click the Add button to add a new entry based on the information entered. Click the Delete All button to remove all the entries based on the information entered. Click the Delete button to remove the specific entry. 284