D-Link DES-3528 Product Manual - Page 159
Bandwidth Control, Bandwidth Control Settings
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Bandwidth Control The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port. Bandwidth Control Settings The Effective RX/TX Rate refers to the actual bandwidth of the Switch port, if it does not match the configured rate. This usually means that the bandwidth has been assigned by a higher priority resource, such as a RADIUS server. To view the following window, click QoS > Bandwidth Control > Bandwidth Control Settings, as shown below: Figure 6-4 Bandwidth Control Settings window The fields that can be configured or viewed are described below: Parameter Description Unit From Port / To Port Type No Limit Select the unit to configure. Use the drop-down menu to select the port range to use for this configuration. This drop-down menu allows a selection between RX (receive), TX (transmit), and Both. This setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both receiving and transmitting packets. This drop-down menu allows the user to specify that the selected port will have no bandwidth limit or not. NOTE: If the configured number is larger than the port speed, it means no bandwidth limit. 150