D-Link DES-3528 Product Manual - Page 312
Ethernet OAM Configuration Settings, > Ethernet OAM > Ethernet OAM Configuration Settings
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 10-14 Ethernet OAM Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit to configure. From Port / To Port Select a range of ports to be configured. Mode Specify to operate in either Active mode or Passive mode The default mode is Active. State Specify that the OAM function state is Enabled or Disabled. The default state is Disabled. Remote Loopback Specify to Start or Stop the OAM remote loopback function. Received Remote Loopback Specify whether to Process or Ignore the received Ethernet OAM remote loopback function. The default method is Ignore. Click the Apply button to implement changes made. Ethernet OAM Configuration Settings This window is used to configure and display the primary controls and status information for Ethernet OAM on the Switch. To view this window, click OAM > Ethernet OAM > Ethernet OAM Configuration Settings, as shown below: 303