D-Link DES-3528 Product Manual - Page 56
SNMP Traps Settings, SNMP Linkchange Traps Settings
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Parameter Description SNMP State Enable this option to use the SNMP feature. Click the Apply button to accept the changes made. SNMP Traps Settings Users can enable and disable the SNMP trap support function of the Switch and SNMP authentication failure trap support, respectively. To view the following window, click Management > SNMP Settings > SNMP Traps Settings, as shown below: Figure 3-34 SNMP Traps Settings window The fields that can be configured are described below: Parameter Description SNMP Traps Enable this option to use the SNMP Traps feature. SNMP Authentication Trap Enable this option to use the SNMP Authentication Traps feature. Linkchange Traps Enable this option to use the SNMP Link Change Traps feature. Coldstart Traps Enable this option to use the SNMP Cold Start Traps feature. Warmstart Traps Enable this option to use the SNMP Warm Start Traps feature. Click the Apply button to accept the changes made. SNMP Linkchange Traps Settings On this page the user can configure the SNMP link change trap settings. To view the following window, click Management > SNMP Settings > SNMP Linkchange Traps Settings, as shown below: 47