D-Link DES-3528 Product Manual - Page 134

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide IPv4 Limited Multicast Range Settings Users can configure the ports and VLANs on the Switch that will be involved in the Limited IPv4 Multicast Range. The user can configure the range of multicast ports that will be accepted by the source ports to be forwarded to the receiver ports. To view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Limited Multicast Range Settings, as shown below: Figure 4-77 IPv4 Limited Multicast Range Settings window The fields that can be configured are described below: Parameter Description Ports / VID List Select the appropriate port(s) or VLAN IDs used for the configuration. Access Assign access permissions to the ports selected. Options listed are Permit and Deny. Profile ID / Profile Name Use the drop-down menu to select the profile ID or profile name used and then assign Permit or Deny access to them. Click the Apply button to accept the changes made. Click the Add button to add a new entry based on the information entered. Click the Delete button to remove the specific entry. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv4 Max Multicast Group Settings Users can configure the ports and VLANs on the Switch that will be a part of the maximum filter group, up to a maximum of 1024. To view the following window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Max Multicast Group Settings, as shown below: 125