D-Link DES-3528 Product Manual - Page 248
JWAC Port Settings window, From Port / To Port, State, Max Authenticating, Host 0-50
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 8-42 JWAC Port Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit to configure. From Port / To Port Use the drop-down menus to select a port or range of ports to configure. State Specify the state of the configured ports. Max Authenticating Host (0-50) Specify the maximum number of host process authentication attempts allowed on each port at the same time. Aging Time (1-1440) Specify the period of time that a host will keep in authenticated state after it successes to authenticate. Enter a value between 1 and 1440 minutes. The default setting is 1440 minutes. To maintain a constant Port Configuration, tick the Infinite check box. Block Time (0-300) Specify the period of time that a host will keep in a blocked state after it fails to authenticate. Enter a value between 0 and 300 seconds. The default setting is 60 seconds. Idle Time (1-1440) Specify the period of time during which there is no traffic for an authenticated host and the host will be moved back to the unauthenticated state. Enter a value between 1 and 1440 minutes. Tick the Infinite check box so that the Idle state of the authenticated host on the port will never be checked. The default setting is Infinite. Click Apply to implement changes made. 239