Home » D-Link Manuals » Hubs & Switches » D-Link DES-3528 » Manual Viewer

D-Link DES-3528 Product Manual - Page 347

Reset, Reboot System, Save Changes, Tools, Reset System window, Reset Config, Apply - factory reset

UPC - 790069314346

Add to My Manuals
Save this manual to your list of manuals

Page 347 highlights

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Reset The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained while resetting all other configuration parameters to their factory defaults. NOTE: Only the Reset System option will enter the factory default parameters into the Switch's nonvolatile RAM, and then restart the Switch. All other options enter the factory defaults into the current configuration, but do not save this configuration. Reset System will return the Switch's configuration to the state it was when it left the factory NOTE: The serial port's baud rate will not be changed by the reset command. It will not be restored to the factory default setting. Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters to their factory defaults. If the Switch is reset using this window, and Save Changes is not executed, the Switch will return to the last saved configuration when rebooted. Open the Tools drop-down menu at the top of the Web manager and click Reset to see the following window: Figure 12-10 Reset System window The fields that can be configured are described below: Parameter Description Reset Selecting this option will factory reset the Switch but not the IP Address, User Accounts and the Banner. Reset Config Selecting this option will factory reset the Switch but not perform a Reboot. Reset System Selecting this option will factory reset the Switch and perform a Reboot. Click the Apply button to initiate the Reset action. Reboot System The window is used to restart the Switch. Open the Tools drop-down menu at the top of the Web manager and click Reboot System to see the following window: Figure 12-11 Reboot System window Click the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before restarting the Switch. Click the No radio button instructs the Switch not to save the current configuration before restarting the Switch. All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot button to restart the Switch. 338

Section	Page
Intended Readers	10
Typographical Conventions	10
Notes, Notices and Cautions	10
Chapter 1 Web-based Switch Configuration	11
Introduction	11
Login to the Web Manager	11
Web-based User Interface	12
Web Pages	13
Chapter 2 System Configuration	14
Device Information	14
System Information Settings	15
Dual Configuration Settings	16
Firmware Information Settings	17
Port Configuration	18
PoE	21
Serial Port Settings	24
System Log configuration	25
Time Range Settings	29
Time Settings	29
User Accounts Settings	30
Stacking	31
Chapter 3 Management	35
ARP	35
Gratuitous ARP	37
IPv6 Neighbor Settings	38
IP Interface	39
Management Settings	43
Session Table	44
Single IP Management	44
SNMP Settings	54
Telnet Settings	64
Web Settings	64
Chapter 4 L2 Features	65
VLAN	65
Q-in-Q	88
Layer 2 Protocol Tunneling Settings	90
Spanning Tree	91
Link Aggregation	100
FDB	103
L2 Multicast Control	107
Multicast Filtering	132
ERPS Settings	136
LLDP	139
Chapter 5 L3 Features	149
Local Route Settings	149
IPv4 Static/Default Route Settings	149
IPv4 Route Table	150
IPv6 Static/Default Route Settings	151
IPv6 Route Table	151
Policy Route Settings	152
IP Forwarding Table	153
Chapter 6 QoS	154
802.1p Settings	156
Bandwidth Control	159
Traffic Control Settings	161
DSCP	164
HOL Blocking Prevention	167
Scheduling Settings	168
SRED	171
Chapter 7 ACL	174
ACL Configuration Wizard	174
Access Profile List	175
CPU Access Profile List	193
ACL Finder	207
ACL Flow Meter	208
Chapter 8 Security	211
802.1X	211
RADIUS	224
IP-MAC-Port Binding (IMPB)	229
MAC-based Access Control (MAC)	236
Web-based Access Control (WAC)	240
Japanese Web-based Access Control (JWAC)	245
Compound Authentication	252
Port Security	256
ARP Spoofing Prevention Settings	258
BPDU Attack Protection	259
Loopback Detection Settings	261
Traffic Segmentation Settings	262
NetBIOS Filtering Settings	263
DHCP Server Screening	264
Access Authentication Control	265
SSL Settings	274
SSH	276
Trusted Host Settings	280
Safeguard Engine Settings	281
Chapter 9 Network Application	284
DHCP	284
DNS	296
PPPoE Circuit ID Insertion Settings	298
SNTP	299
Chapter 10 OAM	302
CFM	302
Ethernet OAM	311
DULD Settings	315
Cable Diagnostics	316
Chapter 11 Monitoring	318
Utilization	318
Statistics	320
Mirror	332
sFlow	334
Ping Test	337
Trace Route	338
Peripheral	340
Chapter 12 Save and Tools	341
Save Configuration ID 1	341
Save Configuration ID 2	341
Save Log	342
Save All	342
Stacking Information	342
Download Firmware	344
Download Configuration File	344
Upload Configuration File	345
Upload Log File	346
Reset	347
Reboot System	347
Appendix A Mitigating ARP Spoofing Attacks Using Packet Content ACL	348
How Address Resolution Protocol Works	348
How ARP Spoofing Attacks a Network	350
Prevent ARP Spoofing via Packet Content ACL	351
Configuration	351
Appendix B System Log and Trap List	354
System Log Entries	354
DES-3528/DES-3552 Series Trap List	362
Proprietary Trap List	362
Appendix C Password Recovery Procedure	365

Match case Limit results 1 per page

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

Reset

The Reset function has several options when resetting the Switch. Some of the current configuration parameters can

be retained while resetting all other configuration parameters to their factory defaults.

NOTE:

Only the Reset System option will enter the factory default parameters into the Switch's non-

volatile RAM, and then restart the Switch. All other options enter the factory defaults into the

current configuration, but do not save this configuration. Reset System will return the Switch's

configuration to the state it was when it left the factory

NOTE:

The serial port’s baud rate will not be changed by the reset command. It will not be restored to

the factory default setting.

Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration

parameters to their factory defaults. If the Switch is reset using this window, and

Save Changes

is not executed, the

Switch will return to the last saved configuration when rebooted.

Open the

Tools

drop-down menu at the top of the Web manager and click

Reset

to see the following window:

Figure 12-10 Reset System window

The fields that can be configured are described below:

Parameter

Description

Reset

Selecting this option will factory reset the Switch but not the IP Address, User Accounts

and the Banner.

Reset Config

Selecting this option will factory reset the Switch but not perform a Reboot.

Reset System

Selecting this option will factory reset the Switch and perform a Reboot.

Click the

Apply

button to initiate the Reset action.

Reboot System

The window is used to restart the Switch.

Open the

Tools

drop-down menu at the top of the Web manager and click

Reboot System

to see the following

window:

Figure 12-11 Reboot System window

Click the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before restarting

the Switch.

Click the No

radio button instructs the Switch not to save the current configuration before restarting the Switch. All of

the configuration information entered from the last time Save Changes

was executed will be lost.

Click the

Reboot

button to restart the Switch.

338