Home » D-Link Manuals » Hubs & Switches » D-Link DES-3528 » Manual Viewer

D-Link DES-3528 Product Manual - Page 303

SenderID TLV, Apply, Delete, Add MA, CFM MA Settings window, MA Max: 22 characters

UPC - 790069314346

Add to My Manuals
Save this manual to your list of manuals

Page 303 highlights

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide None - No MIPs will be created. This is the default value. Auto - MIPs are created when the next lower active MD-level on the port is reached or there are no lower active MD levels. Explicit - MIPs are created when the next lower active MD-level on the port is reached. SenderID TLV Used to define the TLV data types of the maintenance domain. The user can choose between None, Chassis, Manage or Chassis Manage. Click the Apply button to accept the changes made for each individual section. Click the Edit button to configure the MIP Creation and SenderID TLV of the specific entry. Click the Apply button in the table to apply the changes to the specific entry. Click the Delete button to remove the specific entry. Click the Add MA button to configure the CFM MA settings. Click the Add MA button to see the following window. Figure 10-2 CFM MA Settings window The fields that can be configured are described below: Parameter Description MA (Max: 22 characters) VID (1-4094) MIP SenderID CCM Enter the CFM maintenance association (MA) name. Enter a VLAN ID for CFM MA. Use the drop-down menu to select the control creation of MIP. None - Do not create MIPs. Defer - Inherit the setting configured for the maintenance domain that this MA is associated with. This is the default value. Auto - MIPs can always be created on any port in this MA, if that port is not configured with an MEP of that MA. Explicit - MIP can be created on ports which has an existing lower level MEP configured on it, and that port is not configured with an MEP of this MA. Use the drop-down menu to select the control transmission of the sender ID TLV. None - Do not transmit the sender ID TLV. Chassis - Transmit the sender ID TLV with the chassis ID information. Manage - Transmit the sender ID TLV with the manage address information. Chassis Manage - Transmit the sender ID TLV with the chassis ID information and the manage address information. Defer - Inherit the setting configured for the maintenance domain that this MA is associated with. This is the default value. Use the drop-down menu to select CCM interval. The available choices are 10ms, 100ms, 1sec, 10sec, 1min and 10min. 294

Section	Page
Intended Readers	10
Typographical Conventions	10
Notes, Notices and Cautions	10
Chapter 1 Web-based Switch Configuration	11
Introduction	11
Login to the Web Manager	11
Web-based User Interface	12
Web Pages	13
Chapter 2 System Configuration	14
Device Information	14
System Information Settings	15
Dual Configuration Settings	16
Firmware Information Settings	17
Port Configuration	18
PoE	21
Serial Port Settings	24
System Log configuration	25
Time Range Settings	29
Time Settings	29
User Accounts Settings	30
Stacking	31
Chapter 3 Management	35
ARP	35
Gratuitous ARP	37
IPv6 Neighbor Settings	38
IP Interface	39
Management Settings	43
Session Table	44
Single IP Management	44
SNMP Settings	54
Telnet Settings	64
Web Settings	64
Chapter 4 L2 Features	65
VLAN	65
Q-in-Q	88
Layer 2 Protocol Tunneling Settings	90
Spanning Tree	91
Link Aggregation	100
FDB	103
L2 Multicast Control	107
Multicast Filtering	132
ERPS Settings	136
LLDP	139
Chapter 5 L3 Features	149
Local Route Settings	149
IPv4 Static/Default Route Settings	149
IPv4 Route Table	150
IPv6 Static/Default Route Settings	151
IPv6 Route Table	151
Policy Route Settings	152
IP Forwarding Table	153
Chapter 6 QoS	154
802.1p Settings	156
Bandwidth Control	159
Traffic Control Settings	161
DSCP	164
HOL Blocking Prevention	167
Scheduling Settings	168
SRED	171
Chapter 7 ACL	174
ACL Configuration Wizard	174
Access Profile List	175
CPU Access Profile List	193
ACL Finder	207
ACL Flow Meter	208
Chapter 8 Security	211
802.1X	211
RADIUS	224
IP-MAC-Port Binding (IMPB)	229
MAC-based Access Control (MAC)	236
Web-based Access Control (WAC)	240
Japanese Web-based Access Control (JWAC)	245
Compound Authentication	252
Port Security	256
ARP Spoofing Prevention Settings	258
BPDU Attack Protection	259
Loopback Detection Settings	261
Traffic Segmentation Settings	262
NetBIOS Filtering Settings	263
DHCP Server Screening	264
Access Authentication Control	265
SSL Settings	274
SSH	276
Trusted Host Settings	280
Safeguard Engine Settings	281
Chapter 9 Network Application	284
DHCP	284
DNS	296
PPPoE Circuit ID Insertion Settings	298
SNTP	299
Chapter 10 OAM	302
CFM	302
Ethernet OAM	311
DULD Settings	315
Cable Diagnostics	316
Chapter 11 Monitoring	318
Utilization	318
Statistics	320
Mirror	332
sFlow	334
Ping Test	337
Trace Route	338
Peripheral	340
Chapter 12 Save and Tools	341
Save Configuration ID 1	341
Save Configuration ID 2	341
Save Log	342
Save All	342
Stacking Information	342
Download Firmware	344
Download Configuration File	344
Upload Configuration File	345
Upload Log File	346
Reset	347
Reboot System	347
Appendix A Mitigating ARP Spoofing Attacks Using Packet Content ACL	348
How Address Resolution Protocol Works	348
How ARP Spoofing Attacks a Network	350
Prevent ARP Spoofing via Packet Content ACL	351
Configuration	351
Appendix B System Log and Trap List	354
System Log Entries	354
DES-3528/DES-3552 Series Trap List	362
Proprietary Trap List	362
Appendix C Password Recovery Procedure	365

Match case Limit results 1 per page

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

None

– No MIPs will be created. This is the default value.

Auto

– MIPs are created when the next lower active MD-level on the port is reached or

there are no lower active MD levels.

Explicit

– MIPs are created when the next lower active MD-level on the port is reached.

SenderID TLV

Used to define the TLV data types of the maintenance domain. The user can choose

between

None

Chassis

Manage

Chassis Manage

Click the

Apply

button to accept the changes made for each individual section.

Click the

Edit

button to configure the MIP Creation and SenderID TLV of the specific entry.

Click the

Apply

button in the table to apply the changes to the specific entry.

Click the

Delete

button to remove the specific entry.

Click the

Add MA

button to configure the CFM MA settings.

Click the

Add MA

button to see the following window.

Figure 10-2 CFM MA Settings window

The fields that can be configured are described below:

Parameter

Description

MA (Max: 22 characters)

Enter the CFM maintenance association (MA) name.

VID (1-4094)

Enter a VLAN ID for CFM MA.

MIP

Use the drop-down menu to select the control creation of MIP.

None

- Do not create MIPs.

Defer

- Inherit the setting configured for the maintenance domain that this MA is

associated with. This is the default value.

Auto

- MIPs can always be created on any port in this MA, if that port is not configured

with an MEP of that MA.

Explicit

- MIP can be created on ports which has an existing lower level MEP

configured on it, and that port is not configured with an MEP of this MA.

SenderID

Use the drop-down menu to select the control transmission of the sender ID TLV.

None

- Do not transmit the sender ID TLV.

Chassis

- Transmit the sender ID TLV with the chassis ID information.

Manage

- Transmit the sender ID TLV with the manage address information.

Chassis Manage

- Transmit the sender ID TLV with the chassis ID information and the

manage address information.

Defer

- Inherit the setting configured for the maintenance domain that this MA is

associated with. This is the default value.

CCM

Use the drop-down menu to select CCM interval. The available choices are 10ms,

100ms, 1sec, 10sec, 1min and 10min.

294