Home » D-Link Manuals » Hubs & Switches » D-Link DES-3528 » Manual Viewer

D-Link DES-3528 Product Manual - Page 89

VLAN Translation Settings, L2 Features > QinQ > VLAN Translation Settings

UPC - 790069314346

Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Inner TPID This is used to decide if the ingress packet is c-tagged. Inner tag TPID is per system configurable. Unit Select a unit to be configured. From Port / To Port A consecutive group of ports that are part of the VLAN configuration starting with the selected port. Role The user can choose between UNI or NNI role. UNI - To select a user-network interface which specifies that communication between the specified user and a specified network will occur. NNI - To select a network-to-network interface specifies that communication between two specified networks will occur. Missdrop Use the drop-down menu to enable or disable missdrop. If missdrop is enabled, the packet that does not match any VLAN translation rule on the UNI port will be dropped. If disabled, then the packet will be assigned the S-VLAN tag based on the VLAN classification rule of the received port. Outer TPID The Outer TPID is used for learning and switching packets. The Outer TPID constructs and inserts the outer tag into the packet based on the VLAN ID and Inner Priority. Use Inner Priority This is the priority given to the inner tag that is copied to the outer tag if this setting is enabled. Add Inner Tag (hex: 0x1-0xffff) Deselect the Disabled check box and enter an inner tag for the packet to use. Click the Apply button to accept the changes made for each individual section. VLAN Translation Settings VLAN translation translates the VLAN ID carried in the data packets it receives from private networks into those used in the Service Providers network. To view this window, click L2 Features > QinQ > VLAN Translation Settings, as shown below: Figure 4-27 VLAN Translation Settings window The fields that can be configured are described below: Parameter Description Unit From Port / To Port CVID (1, 5-7) Action SVID (1-4094) Priority Select a unit to be configured. A consecutive group of ports that are part of the VLAN configuration starting with the selected port. The customer VLAN ID List to which the tagged packets will be added. Specify for SPVID packets to be added or replaced. This configures the VLAN to join the Service Providers VLAN as a tagged member. Select a priority for the VLAN ranging from 0 to 7. With 7 having the highest priority. 80

Section	Page
Intended Readers	10
Typographical Conventions	10
Notes, Notices and Cautions	10
Chapter 1 Web-based Switch Configuration	11
Introduction	11
Login to the Web Manager	11
Web-based User Interface	12
Web Pages	13
Chapter 2 System Configuration	14
Device Information	14
System Information Settings	15
Dual Configuration Settings	16
Firmware Information Settings	17
Port Configuration	18
PoE	21
Serial Port Settings	24
System Log configuration	25
Time Range Settings	29
Time Settings	29
User Accounts Settings	30
Stacking	31
Chapter 3 Management	35
ARP	35
Gratuitous ARP	37
IPv6 Neighbor Settings	38
IP Interface	39
Management Settings	43
Session Table	44
Single IP Management	44
SNMP Settings	54
Telnet Settings	64
Web Settings	64
Chapter 4 L2 Features	65
VLAN	65
Q-in-Q	88
Layer 2 Protocol Tunneling Settings	90
Spanning Tree	91
Link Aggregation	100
FDB	103
L2 Multicast Control	107
Multicast Filtering	132
ERPS Settings	136
LLDP	139
Chapter 5 L3 Features	149
Local Route Settings	149
IPv4 Static/Default Route Settings	149
IPv4 Route Table	150
IPv6 Static/Default Route Settings	151
IPv6 Route Table	151
Policy Route Settings	152
IP Forwarding Table	153
Chapter 6 QoS	154
802.1p Settings	156
Bandwidth Control	159
Traffic Control Settings	161
DSCP	164
HOL Blocking Prevention	167
Scheduling Settings	168
SRED	171
Chapter 7 ACL	174
ACL Configuration Wizard	174
Access Profile List	175
CPU Access Profile List	193
ACL Finder	207
ACL Flow Meter	208
Chapter 8 Security	211
802.1X	211
RADIUS	224
IP-MAC-Port Binding (IMPB)	229
MAC-based Access Control (MAC)	236
Web-based Access Control (WAC)	240
Japanese Web-based Access Control (JWAC)	245
Compound Authentication	252
Port Security	256
ARP Spoofing Prevention Settings	258
BPDU Attack Protection	259
Loopback Detection Settings	261
Traffic Segmentation Settings	262
NetBIOS Filtering Settings	263
DHCP Server Screening	264
Access Authentication Control	265
SSL Settings	274
SSH	276
Trusted Host Settings	280
Safeguard Engine Settings	281
Chapter 9 Network Application	284
DHCP	284
DNS	296
PPPoE Circuit ID Insertion Settings	298
SNTP	299
Chapter 10 OAM	302
CFM	302
Ethernet OAM	311
DULD Settings	315
Cable Diagnostics	316
Chapter 11 Monitoring	318
Utilization	318
Statistics	320
Mirror	332
sFlow	334
Ping Test	337
Trace Route	338
Peripheral	340
Chapter 12 Save and Tools	341
Save Configuration ID 1	341
Save Configuration ID 2	341
Save Log	342
Save All	342
Stacking Information	342
Download Firmware	344
Download Configuration File	344
Upload Configuration File	345
Upload Log File	346
Reset	347
Reboot System	347
Appendix A Mitigating ARP Spoofing Attacks Using Packet Content ACL	348
How Address Resolution Protocol Works	348
How ARP Spoofing Attacks a Network	350
Prevent ARP Spoofing via Packet Content ACL	351
Configuration	351
Appendix B System Log and Trap List	354
System Log Entries	354
DES-3528/DES-3552 Series Trap List	362
Proprietary Trap List	362
Appendix C Password Recovery Procedure	365

Match case Limit results 1 per page

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide

Inner TPID

This is used to decide if the ingress packet is c-tagged. Inner tag TPID is per system

configurable.

Unit

Select a unit to be configured.

From Port / To Port

A consecutive group of ports that are part of the VLAN configuration starting with the

selected port.

Role

The user can choose between UNI or NNI role.

UNI

– To select a user-network interface which specifies that communication between the

specified user and a specified network will occur.

NNI

– To select a network-to-network interface specifies that communication between two

specified networks will occur.

Missdrop

Use the drop-down menu to enable or disable missdrop. If missdrop is enabled, the packet

that does not match any VLAN translation rule on the UNI port will be dropped. If disabled,

then the packet will be assigned the S-VLAN tag based on the VLAN classification rule of

the received port.

Outer TPID

The Outer TPID is used for learning and switching packets. The Outer TPID constructs and

inserts the outer tag into the packet based on the VLAN ID and Inner Priority.

Use Inner Priority

This is the priority given to the inner tag that is copied to the outer tag if this setting is

enabled.

Add Inner Tag

(hex: 0x1-0xffff)

Deselect the Disabled check box and enter an inner tag for the packet to use.

Click the

Apply

button to accept the changes made for each individual section.

VLAN Translation Settings

VLAN translation translates the VLAN ID carried in the data packets it receives from private networks into those used

in the Service Providers network

To view this window, click

L2 Features > QinQ > VLAN Translation Settings

, as shown below:

Figure 4-27 VLAN Translation Settings window

The fields that can be configured are described below:

Parameter

Description

Unit

Select a unit to be configured.

From Port / To Port

A consecutive group of ports that are part of the VLAN configuration starting with the

selected port.

CVID (1, 5-7)

The customer VLAN ID List to which the tagged packets will be added.

Action

Specify for SPVID packets to be added or replaced.

SVID (1-4094)

This configures the VLAN to join the Service Providers VLAN as a tagged member.

Priority

Select a priority for the VLAN ranging from

. With 7 having the highest priority.