D-Link DES-3528 Product Manual - Page 172

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 6-14 SRED Settings window The following parameters can be configured: Parameter Description SRED State Click the radio buttons to enable or disable sRED. Unit Select the unit to configure. From Port / To Port Enter the port or port list to configure. Class ID Use the drop-down menu to select the class ID. Tick the All check box to apply to all class ID. Drop Green Select Disable to drop red colored packets if the queue depth is above the low threshold, and drop yellow colored packets if the queue depth is above the high threshold. Select Enable to drop yellow and red colored packets if the queue depth is above the low threshold, and drop green colored packets if the queue depth is above the high threshold. Threshold Low (0-100) Specify the low percent of space utilized. By default, the value is 60. The range is 0 to 100. Threshold High (0-100) Specify the high percent of queue space utilized. By default, the value is 80. The range is 0 to 100. Drop Rate Low Specify the drop rate of the low threshold. Drop Rate High Specify the drop rate of the high threshold. Click the Apply button to accept the changes made for each individual section. 163