D-Link DES-3528 Product Manual - Page 244

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide WAC Port Settings Users can view and set port configurations for Web authentication. To view this window, click Security > Web-based Access Control (WAC) > WAC Port Settings, as shown below: Figure 8-39 WAC Port Settings window The fields that can be configured are described below: Parameter Description Unit From Port To Port Aging Time (1-1440) State Idle Time (1-1440) Select the unit to configure. Use this drop-down menu to select the beginning port of a range of ports to be enabled as WAC ports. Use this drop-down menu to select the ending port of a range of ports to be enabled as WAC ports. This parameter specifies the time period during which an authenticated host will remain in the authenticated state. Enter a value between 1and 1440 minutes. Tick the Infinite check box to indicate the authenticated host will never age out on the port. The default value is 1440 minutes (24 hours). Use this drop-down menu to enable the configured ports as WAC ports. If there is no traffic during the Idle Time parameter, the host will be moved back to the unauthenticated state. Enter a value between 1 and 1440 minutes. Tick the Infinite check 235