D-Link DES-3528 Product Manual - Page 80

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide To view this window, click L2 Features > Subnet VLAN > Subnet VLAN Settings, as shown below: Figure 4-15 Subnet VLAN Settings window The following parameters can be configured: Parameter Description VLAN Name The VLAN Name to be associated with the subnet. VID / VID List The VLAN ID to be associated with the subnet. Priority The priority to be associated with the subnet. Its range is 0 to 7. IPv4 Network Address Enter an IPv4 network address. The format is IP address/prefix length. IPv6 Network Address Enter an IPv6 network address. The format is IP address/prefix length. The prefix length of the IPv6 network address cannot be greater than 64 bites. Enter the appropriate information and click Add to create a new entry. To search for a particular entry enter the appropriate information and click Find. To remove an entry click Delete. To view all entries on the Switch click Show All. To remove all entries click Delete All. VLAN Precedence Settings The VLAN precedence settings are used to configure VLAN classification precedence on each port. You can specify the order of MAC-based VLAN classifications and subnet-based VLAN classifications. If a port's VLAN classification is a MAC-based precedence, MAC-based VLAN classification will be processed first. If MAC-based VLAN classification fails, the subnet-based VLAN classification will be executed. If a port's VLAN classification is subnet-based VLAN precedence, the subnet-based VLAN classification will be processed first. If subnet-based VLAN classification fails, the MAC-based VLAN classification will be executed. To view this window, click L2 Features > Subnet VLAN > VLAN Precedence Settings, as shown below: 71