D-Link DES-3528 Product Manual - Page 165
DSCP Map Settings, QoS > DSCP > DSCP Map Settings, DSCP Map Settings window
UPC - 790069314346
View all D-Link DES-3528 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide DSCP Map Settings The mapping of DSCP to queue will be used to determine the priority of the packet (which will be then used to determine the scheduling queue) when the port is in DSCP trust state. The DSCP-to-DSCP mapping is used in the swap of DSCP of the packet when the packet is ingresses to the port. The remaining processing of the packet will base on the new DSCP. By default, the DSCP is mapped to the same DSCP. To view the following window, click QoS > DSCP > DSCP Map Settings, as shown below: Figure 6-8 DSCP Map Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit to configure. From Port / To Port Use the drop-down menu to select a range of port to configure. DSCP Map Use the drop-down menu to select one of three options: DSCP Priority - Specify a list of DSCP values to be mapped to a specific priority. DSCP DSCP - Specify a list of DSCP value to be mapped to a specific DSCP. DSCP Color - Specify a list of DSCP values to be mapped to a specific color. DSCP List (0-63) Enter a DSCP List value. Priority Use the drop-down menu to select a Priority value. Click the Apply button to accept the changes made. To view the following window, click QoS > DSCP > DSCP Map Settings and select DSCP DSCP from the DSCP Map drop-down menu, as shown below: 156