D-Link DES-3528 Product Manual - Page 309

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide CFM Linktrace Settings This window is used to configure the CFM linktrace settings on the Switch. To view this window, click OAM > CFM > CFM Linktrace Settings, as shown below: Figure 10-10 CFM Linktrace Settings window The fields that can be configured are described below: Parameter Description MEP Name The name of the Maintenance End Point. MEP ID (1-8191) The ID for the Maintenance End Point between 1 and 8191. MD Name The Maintenance Domain Name. MA Name The Maintenance Association Name. MAC Address The destination MAC address. TTL (2-255) The linktrace message TTL value. The default value is 64. PDU Priority The 802.1p priority to be set in the transmitted LTM. If the PDU Priority is not specified, it uses the same priority as CCMs sent by the MA. Click Apply to implement changes made. Click the Find button to locate a specific entry based on the information entered. Click the Delete button to remove the specific entry. Click the Delete All button to remove all the entries. CFM Packet Counter This window is used to show the CFM Packet Counter List on the Switch. To view this window, click OAM > CFM > CFM Packet Counter, as shown below: 300