D-Link DES-3528 Product Manual - Page 41

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Interface Name Enter the name of the IP interface to search for. Click the Find button to locate a specific entry based on the information entered. Click the Add button to add a new entry based on the information entered. Click the Delete All button to remove all the entries listed. Click the IPv4 Edit button to edit the IPv4 settings for the specific entry. Click the IPv6 Edit button to edit the IPv6 settings for the specific entry. Click the Delete button to remove the specific entry. NOTE: To create IPv6 interfaces, the user has to create an IPv4 interface then edit it to IPv6. Click the Add button to see the following window. Figure 3-9 IPv4 Interface Settings - Add window The fields that can be configured are described below: Parameter Description IP Interface Name Enter the name of the IP interface being created. IPv4 Address Enter the IPv4 address used. Subnet Mask Enter the IPv4 subnet mask used. VLAN Name Enter the VLAN Name used. Interface Admin State Use the drop-down menu to enable or disable the Interface Admin State. Click the Apply button to accept the changes made. Click the