D-Link DES-3528 Product Manual - Page 254

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 8-47 Compound Authentication Settings window The fields that can be configured are described below: Parameter Description Authorization Network State Authentication Server Failover Unit From Port To Port Security Mode Click the radio buttons to enable of disable the Authorization Network State. Click the radio buttons to configure the authentication server failover function. Block (default setting) - The client is always regarded as un-authenticated. Local - The Switch will resort to using the local database to authenticate the client if RADIUS server cannot be reached. If the client fails on local authentication, the client is regarded as un-authenticated, otherwise, it authenticated. Permit - The client is always regarded as authenticated. If guest VLAN is enabled, clients will stay on the guest VLAN, otherwise, they will stay on the original VLAN. Select the unit to configure. Use this drop-down menu to select the beginning port of a range of ports to be enabled as compound authentication ports. Use this drop-down menu to select the ending port of a range of ports to be enabled as compound authentication ports. The compound authentication method options include: None, Any (MAC, 802.1X or WAC/JWAC), 802.1X+IMPB, IMPB+JWAC, IMPB+WAC, and MBA+IMPB. None - all compound authentication methods are disabled. Any (MAC, 802.1X or WAC) - if any of the authentication methods pass, then access will be granted. In this mode, MAC, 802.1X and WAC/JWAC can be enabled on a port at the same time. In Any (MAC, 802.1X or WAC/JWAC) mode, 245