D-Link DES-3528 Product Manual - Page 97

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 4-30 MST Configuration Identification window The fields that can be configured are described below: Parameter Description Configuration Name This name uniquely identifies the MSTI (Multiple Spanning Tree Instance). If a Configuration Name is not set, this field will show the MAC address to the device running MSTP. Revision Level (0-65535) This value, along with the Configuration Name, identifies the MSTP region configured on the Switch. MSTI ID Enter a number between 1 and 15 to set a new MSTI on the Switch. Type This field allows the user to choose a desired method for altering the MSTI settings. The user has two choices: Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List parameter. Remove VID - Select this parameter to remove VIDs from the MSTI ID, in conjunction with the VID List parameter. VID List (1-4094) This field is used to specify the VID range from configured VLANs set on the Switch. Supported VIDs on the Switch range from ID number 1 to 4094. Click the Apply button to accept the changes made for each individual section. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. STP Instance Settings This window displays MSTIs currently set on the Switch and allows users to change the Priority of the MSTIs. To view the following window, click L2 Features > Spanning Tree > STP Instance Settings, as shown below: 88