D-Link DES-3528 Product Manual - Page 26

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide System Log Server Settings The Switch can send System log messages to up to four designated servers using the System Log Server. To view the following window, click System Configuration > System Log Configuration > System Log Server Settings, as shown below: Figure 2-11 System Log Server Settings The fields that can be configured are described below: Parameter Description Server ID Syslog server settings index (1 to 4). Severity Use the drop-down menu to select the higher level of messages that will be sent. All messages which level is higher than selecting level will be sent. The options are Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debug. Server IPv4 Address Click the radio button and enter the IPv4 address of the Syslog server. Server IPv6 Address Click the radio button and enter the IPv6 address of the Syslog server. Facility Use the drop-down menu to select Local 0, Local 1, Local 2, Local 3, Local 4, Local 5, Local 6, or Local 7. UDP Port Type the UDP port number used for sending Syslog messages. The default is 514. Status Choose Enabled or Disabled to activate or deactivate. Click the Apply button to accept the changes made. Click the Delete All button to remove all servers configured. System Log Users can view and delete the local history log as compiled by the Switch's management agent. To view the following window, click System Configuration > System Log Configuration > System Log, as shown below: 17