D-Link DES-3528 Product Manual - Page 28

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Figure 2-13 System Log & Trap Settings window (EI Mode Only) The fields that can be configured are described below: Parameter Description Interface Name Enter the IP interface name used. IPv4 Address Enter the IPv4 address used. IPv6 Address Enter the IPv6 address used. Click the Apply button to accept the changes made for each individual section. Click the Clear button to clear all the information entered in the fields. System Severity Settings The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings window to set the criteria for alerts. The current settings are displayed below the System Severity Table. To view the following window, click System Configuration > System Log Configuration > System Severity Settings, as shown below: Figure 2-14 System Severity Settings window The fields that can be configured are described below: Parameter Description System Severity Severity Level Choose how the alerts are used from the drop-down menu. Select Log to send the alert of the Severity Type configured to the Switch's log for analysis. Choose Trap to send it to an SNMP agent for analysis, or select All to send the chosen alert type to an SNMP agent and the Switch's log for analysis. This drop-down menu allows you to select the level of messages that will be sent. The options 19