D-Link DES-3528 Product Manual - Page 38

xStack® DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch Web UI Reference Guide Gratuitous ARP Settings The user can configure the IP interface's gratuitous ARP parameter. To view the following window, click Management > Gratuitous ARP > Gratuitous ARP Settings, as shown below: Figure 3-5 Gratuitous ARP Settings window The fields that can be configured are described below: Parameter Description Trap Use the drop-down menu to enable or disable the trap option. By default the trap is Disabled. Log Use the drop-down menu to enable or disable the logging option. By default the event log is Enabled. Interface Name Enter the interface name of the Layer 3 interface. Select All to enable or disable gratuitous ARP trap or log on all interfaces. Interval Time Enter the periodically send gratuitous ARP interval time in seconds. 0 means that gratuitous ARP request will not be sent periodically. By default the interval time is 0. Click the Apply button to accept the changes made for each individual section. IPv6 Neighbor Settings The user can configure the Switch's IPv6 neighbor settings. The Switch's current IPv6 neighbor settings will be displayed in the table at the bottom of this window. To view the following window, click Management > IPv6 Neighbor Settings, as shown below: Figure 3-6 IPv6 Neighbor Settings window The fields that can be configured are described below: 29